China Mud Pump Factory Mining A05 Parts Mud Pump Stock

Introduction: 1. HS series slurry pump is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The wearing parts are made of ultra chrome or and rubber. It will maintain high efficiency over the wear life of its components. 2. The metal wet parts a

Featured Products

Introduction: 
1. HS series slurry pump is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The wearing parts are made of ultra chrome or and rubber. It will maintain high efficiency over the wear life of its components. 
2. The metal wet parts and rubber ones can be interchangeable for handling different liquids or slurries.
3. HS slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and feature high efficiency performance capable of flow rates from 10.8 to 5400 m³/h and heads up to 125 meters for high head models. 

China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock

Features:
1. Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner
and can beremoved completely;

2. Interchangeable anti-abrasive wet parts made of high-chrome alloys;
3. 
Casing halves of ductile iron with external reinforcing ribs provide high operating pressure capabilities
and an extra measure of safety.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
5. Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR control, etc;

6. The shaft seal uses the packing seal, expeller seal and mechanical seal
China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock


Typical Application:
• Mineral processing• Mining• Coal Washery• Cyclone feeds
Bentonite• Chemical slurry• Tailing• Mill grinding
• Ash handing• Tunnel• Waste sludge• Coarse sand
• Lime mud• Phosphoric acid• Dredging• Construction
• Alumina Industry• Power Plant• Potash Fertilizer Plant• Other industries
Iron ore sandCopper ConcentrationGold mineMolybdenum
China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock
ModelMax Power
(Kw)
Inlet & Outlet size (inch)Material for Wear PartsFlow Rate (Q)Head
(H)
meter
Speed
(RPM)
Impeller Dia.
(mm)
m³/hrl/s
25HS-B151.5/1M12.6~28.83.5~86~681200~3800152
R10.8~25.23~77~521400~3400152
40HS-B152/1.5M32.4~729~206~581200~3200184
R25.2~547~155.5~411000~2600178
50HS-C303/2M39.6~86.411~2412~641300~2700214
R36~75.610~2113~461300~2300213
75HS-C304/3M86.4~19824~559~521000~2200245
R79.2~18022~505~34.5800~1800245
100HS-D606/4M162~36040~10012~56800~1550365
R144~32440~9012~45800~1350365
150HS-E1208/6M360~828100~23010~61500~1140510
R324~72090~2007~49400~1000510
200MS-E12010/8M666~1440185~40014~60600~1100549
200HS-ST56010/8M612~1368170~38011~61400~850686
R540~1188150~33012~50400~750686
250HS-ST56012/10M936~1980260~5507~68300~800762
R720~1620200~4507~45300~650762
300HS-TU56014/12M1260~2772350~77013~63300~600965
R1152~2520320~70013~44300~500965
350HS-TU120016/14M1368~3060380~85011~63250~5501067
450HS-TU120020/18M2520~5400700~150013~57200~4001370
25HHS-C301.5/1M16.2~34.24.5~9.525~921400~2200330
50HHS-D603/2M68.4~136.819~3825~87850~1400457
75HHS-E1204/3M126~25235~7012~97600~1400508
100HHS-E1206/4M324~72090~20030~118600~1000711
150HHS-S5608/6M468-1008130~28020~94500~1000711
For the material of wearing parts,
"M" = metal, ultra chromium alloy;         "R" = anti-abrasive rubber
China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock

China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock

China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock
China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock

China Slurry Pump Factory Mining A05 Parts Slurry Pump Stock
Contact

Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours