Single-stage split case pump for fire fighting pump
Single-stage split case pump for fire fighting pump is horizontal single-stage double-suction split volute casting centrifugal pump that is specially designed and manufctured by our company which based on the market requirement and introduced from abroad.Pumps with both original impellers and modified impellers are available with enoughstock. According to consumers' needs,our company could provide pumps with complete range of flow and head .
This kind of pumps are uaually used to transfer clean water or similar liquids.They are suitable for water supply and discharge project for factories,mining,city and power station,meanwhile,farm irrigation and flood draining also use the pumps.
1,The structure of type Single-stage split case pump for fire fighting pump is horizontal.The inlet and outlet are below the axis,its centerline is horizontal and perpendicular to the axis,the casing is split casing.It is not necessary to disassemble the pipes and motor during repair;
2,The pump is made of casing parts,rotor parts,bearing parts,shaft sealing parts and coupling parts etc.;
3,There are two types of shaft sealings:packing seal and mechanical seal;
4,Pump is driven by motor(or other driver)through flexible coupling.The rotating direction is clockwise viewed from motor normally.
The picture is one S type water pump with motor and common base
|1. Pump body||3 .Impeller||5. Shfat||7. Bearing||9. Packing Gland|
|2. Pump cover||4. Wear ring||6. Sleeve||8. Packing||10.Water pipe fittings|
Technical data(design point):
Flow Q: 160-18000m3/h
Head H: 10-130m
Max inlet pressure: 6 bar